Products
Equipment for every stage of the cure
From a two-metre development autoclave to a production cell under a single supervisory layer — specified around your parts, your throughput and the standard you are audited against.
Autoclaves
The Econoclave®
1 m to 7.6 m working diameter, to 425°C and 25 bar, with individually monitored vacuum ports and automatic pre-run leak testing.
Autoclave systems
Ovens
Curing ovens
Forced-convection ovens designed around your loaded charge geometry — typically ±3°C across a full working volume, AMS2750 survey ready.
Curing ovensSpecialised
Specialised equipment
Hot drape formers, steam dewaxing autoclaves, glass lamination vessels and bespoke process plant built to PED and ASME code.
ExploreControl & upgrade
The part that decides whether your parts pass
CPC
CPC control systems
Three tiers, one process record: CPC on Appward for new installations, CPC Enterprise for multi-cell sites, and CPC Legacy still fully supported for operators who prefer it.
CPC platformRETROFIT
AnyOEM Retrofit"
Modern control, instrumentation and interlock safety on equipment built by anyone — including manufacturers who no longer exist — without touching the pressure envelope.
Retrofit programmeSPARES
Spare parts
Critical spares held in the UK: door seals, thermocouples, vacuum transducers, fan bearings, contactors and control cards for ASC and third-party equipment.
Order sparesSpecifying
What we need to quote properly
A useful quotation takes about a week and five pieces of information. A guess takes an afternoon and costs you two years later.
The parts
The cure cycle
The throughput
The standard
The building
Send us your cure cycle.
We will tell you what it takes to run it reliably — including when the honest answer is a smaller machine than you asked for.