Out-of-autoclave
Curing ovens & specialised equipment
Where the resin system does not need pressure, an oven is the cheaper machine to buy and to run — provided it holds uniformity with the load actually in it.
Curing ovens
Uniformity under a full charge, not an empty box.
We design the plenum and return path around your actual charge geometry and verify it by CFD before fabrication. Vacuum manifolds, part thermocouples and the same CPC platform used on our autoclaves come as standard — so an oven and an autoclave on the same floor produce the same batch record in the same format.
- Walk-in, drive-in and multi-zone configurations
- Integrated vacuum pumping with per-port monitoring
- Class 2 / Class 3 furnace classification achievable
- Heat recovery for high-duty-cycle production
- Working volume1 – 500 m³
- Maximum temperature350 °C
- Uniformity±3 °C loaded
- AirflowHorizontal or vertical
- ControlCPC on Appward
- SurveyAMS2750 ready
Specialised equipment
Built for a duty, not a catalogue
Hot drape formers
Zoned infrared preheat and diaphragm forming for stringers, spars and complex-curvature preforms — reducing hand layup time and improving repeatability before the part reaches the autoclave.
- Table sizesto 12 m
- PreheatZoned IR
- FormingSingle / twin diaphragm
Dewaxing autoclaves
Steam dewaxing for investment casting — rapid pressurisation for clean shell release, integrated wax recovery and corrosion-resistant construction designed around maintenance access.
- CycleRapid pressurisation
- RecoveryIntegrated wax handling
- BuildCorrosion resistant
Process vessels
Glass lamination, AAC concrete curing, sterilisation and bespoke pressure vessels, code-stamped with full material traceability.
- Design codePED / ASME VIII
- MaterialsCS, SS, clad
- TraceabilityFull material cert.
Not sure whether you need an oven or an autoclave?
Send the resin system and the cure cycle. If an oven will do the job we will say so — it is the cheaper machine and we would rather you bought the right one.